An Ounce of Prevention Can Avert Sump Pump Disaster
Checklist To Use When Checking The Pump Equipment
A sump pump is an important safeguard for homeowners with basements, cellars, or homes in low-lying areas that tend to flood. It removes excess water from inside or around the home to a safe area away from the home’s foundation. Like most appliances and machines, it requires regular maintenance to remain in reliably working order.
A good rule of thumb is to check the pump at the beginning of the wet season or at the daylight savings time change. The following is a basic checklist to use when checking the pump equipment.
- Inspect the electrical connection. Examine the pump’s power cord for fraying or wear. Be sure to unplug the pump or switch off the circuit breaker when inspecting potential cord damage. Replace damaged or worn cords as necessary.
- Remove debris. Dirt, stray trash, and other detritus can clog the intake, preventing the sump pump from drawing in water and eventually causing catastrophic failure. Remove any potential obstructions not only from the sump, but also from the surrounding area.
- Examine the discharge pipe. Locate the end of the discharge pipe and inspect for any blockages. Pipes are typically covered with a screen or grate to prevent animals from entering or nesting in the pipe. Make sure the outflow is clear of debris and unobstructed.
- Evaluate pump operation. Fill a large bucket with water, and pour enough water into the sump to lift the pump’s float. Ensure the pump empties most of the water from the sump, or at least until the float returns to its original position.
- Expect the unexpected: Be familiar with professionals in Ladue, MO, who can repair or replace failed pumps or offer water damage cleanup should disaster strike.
Making sump pump maintenance an annual routine will ensure the pump operates when needed. After all, it will be better to find out the pump needs repair before the basement is covered in three feet of water.